Battery replacement dead or alive.

 TOOLS NEEDED: gloves, terminal cleaner, steel brush, socket set, screw driver

1.) Get a replacement battery
2.) Locate battery on vehicle (under hood, under rear seats, fender well, trunk)
3.) For inspection reasons batteries must have a hold down, decide how to loosen or remove hold down
4.) Then disconnect negative ( - ) terminal first
5.) Now disconnect positive battery ( + ) terminal
6.) Remove battery, Install new battery
7.) Use cleaner ( even baking soda) and clean the terminals making for a good contact surface
8.) Install hold down, then the positive terminal
9.) Now re-connect negative terminal and tighten both terminals
10.) Make sure vehicle starts and go cruising with your new energized battery!